Expansion Joints Replaced at Wastewater Plant
Existing joint material had become defective allowing leaking of fluid.
CASE
Belzona Air Handling Fan & Shroud
Problem
Fan was constantly going out of balance due to particulate sticking to the blade.
Industry
Facilities Maintenance
Application Date
2003
Location
Hamilton / Canada
Equipment Application
FBC-Fans, Blowers and Compressors
Subtrate
Galvanized Steel
Product
Belzona 1341 (Supermetalglide)
Repair Stages
Application Situation
Air Handling Fan. Fan blasted to 3-4 mil profile white metal finish
Application Method
The Application was carried out in accordance with Belzona Know-How System Leaflet FBC-2.
Belzona Facts
The fan was dynamically balanced before and after the application.
Contact your nearest Belzona Consultant and schedule a free evaluation!
Other Cases
Belzona Reclaims a Shaft After a Bearing Failure Damaged Both Ends
A hydraulic press on either end of an embossing roller is used to control appropriate operating pressure, caused premature bearing failure, damaging both ends of the shaft.
Repair And Coating for a Boiler Feed Pump
After 3 to 4 months in use the boiler feed pump was suffering from general corrosion/erosion and the metal shavings in the feed eventually would lead to a through hole in the casing.