Belzona metal repair composites and marine coatings are specifically formulated for rebuilding and protecting ships and offshore structures in the marine industry.
Belzona’s comprehensive range of rapid and cold-curing marine coatings and metal repair composites has been used by the marine industry for over 60 years. Our products are specifically designed to withstand harsh offshore conditions and have exceptional resistance against erosion and corrosion.
Marine equipment commonly suffers from cavitation, impingement and entrainment. These erosive forces can quickly destroy conventional coatings and lead to corrosion. Belzona provides long-term solutions to eliminate corrosion and reduce the effects of erosion.
Rudders suffering from erosion and corrosion are repaired and improved using Belzona’s metal rebuilding composites and epoxy coatings. With insulating properties our erosion resistant products will stop corrosion and limit the effect of the erosive forces. Cavitation is combatted with a coating system combining Belzona 1341 (Supermetalglide) and Belzona 2141 (ACR-Fluid Elastomer).
The marine propulsion systems vary depending on the type of vessel, but they all suffer from cavitation problems. Belzona offer metal rebuilding and resurfacing products to reclaim lost substrate. Protect kort nozzles, jet tubes, and propellers from future attack with erosion, corrosion and cavitation resistant materials.
Shafts operate under high mechanical forces and this can often lead to damage and wear. With Belzona’s metal rebuilding materials shafts can be repaired in situ with minimal downtime. Our durable, corrosion preventative coatings protect tail shafts from erosive and corrosive effects.
Marine engines commonly suffer from cracked casings and cooling problems. Cavitation and corrosion occurs heavily around the cylinder blocks and liners. These problems can be resolved with our high temperature repair composites and coatings which reclaim and protect damaged areas, extending the engine life.
The marine propulsion systems vary depending on the type of vessel, but they all suffer from cavitation problems. Belzona offer metal rebuilding and resurfacing products to reclaim lost substrate. Protect kort nozzles, jet tubes, and propellers from future attack with erosion, corrosion and cavitation resistant materials.
Rubber equipment common in the marine industry such as fenders, buoys, bellows and hoses are prone to in-service deterioration, where even minor rips and tears can lead to equipment being decommissioned. Belzona Elastomers are cold-applied flexible polyurethanes, which can return equipment into serviceable conditions with reduced downtime and for a fraction of the cost.
Ideal for use offshore, Belzona fast-curing and extended working life epoxy composites are engineered specifically for in-situ application to wet, oil contaminated and underwater surfaces. Belzona 1212 provides a safe and simple repair solution to unplanned maintenance needs at sea for equipment such as pipes, engines, shafts and hydraulic rams.
With potable water approvals and high chemical resistance, Belzona can solve most storage tank problems, ranging from emergency leaks on wet and oily surfaces to chemical attack and corrosion damage.
✓ Exhaust and turbo blowers
✓ Stern tubes
✓ Auxiliary diesel engines
✓ Alternators/generators
✓ Tank cleaning systems
✓ Oily water separators
✓ Steering gear
✓ Pumps
✓ Heat exchangers
✓ Pipework
✓ Deck winches
✓ Lifeboats
✓ Access ladders
Contact your nearest Belzona Consultant and schedule a free evaluation!
Deck floor was experiencing deterioration around mess room top. With critical connections around the area, welding would be too much of a risk. Consultant contacted us and we suggested plate bonding to reinforce the area and protect from further damage.
Deep pitting on the bow thruster tunnel due to cavitation.
The gray and black tanks inside the marine vessel were suffering from coating failure and corrosion issues. The main flange also required repair from wear.