Search Results

With a wide range of case studies featuring different industries, equipment, products and more with hands on solutions provided.

Application: MPT-Mechanical Power Transmission

MPT-Mechanical Power Transmission

Belzona Shaft Repair on Commercial Mixer in Food Production Facility

The Client, operating a Food Production facility in Mississauga, Ontario. Had a large scale, horizontal mixer experiencing advanced wear on several output shafts. Subsequently, the mechanical seals were unable to perform due to the damage, causing both product leakage and potential contamination. The equipment was apiece of legacy hardware that had previously been retrofitted and repaired using an unknown product.

MPT-Mechanical Power Transmission

Repair of Small Gouges in Bearing Housing Using Belzona 1511

The customer needed to repair small gouges across the full width of a bearing housing after the removal of a nodular iron bearing. The housing operates at temperatures up to 180°C (350°F), and while abrasion resistance was not required, the repair material needed to offer strong adhesion, withstand elevated temperatures, and be suitable for filling fine voids without a coarse aggregate interfering with the surface finish.

MPT-Mechanical Power Transmission

Oil Leak in Transformer Sealed at Major Power Distribution Facility

Customer had a leak in one of their oil transformer units. They could not replace the flange without emptying the oil in the transformer which would take more time and money.

MPT-Mechanical Power Transmission

Stemming and Sealing High Voltage Transformer Oil Leak

Customer was looking for a solution to stem and seal oil leakages from flanges and under the high voltage bushing pockets.

MPT-Mechanical Power Transmission

Belzona Saves This Bull Gear for a Second Time

12-years prior, the assembly was rebuilt with Belzona 1111 (Super Metal) which needed refurbishment. Excess play in the spline made it difficult for precision movements.

MPT-Mechanical Power Transmission

Injection Saves Roofing Manufacturer Time and Money

A roller in the production process had become damaged due to the failure of a bearing.

MPT-Mechanical Power Transmission

Shaft Repair at Wastewater Plant

Shaft became worn due to bearing failure.

MPT-Mechanical Power Transmission

Belzona Restores Hydrogen Cooler Ends

Seals had become out of round and as a result gas leaks had started.

MPT-Mechanical Power Transmission

Belzona Reclaims a Shaft After a Bearing Failure Damaged Both Ends

A hydraulic press on either end of an embossing roller is used to control appropriate operating pressure, caused premature bearing failure, damaging both ends of the shaft.