With a wide range of case studies featuring different industries, equipment, products and more with hands on solutions provided.
Customer had a new tank and wanted to protect the inside with a lining that would protect it from 75% Phosphoric acid thereby extending its service life.
A municipality discovered a perforation in a carbon steel pipe feeding a pressure vessel containing granular activated carbon. The pipe, which conveys potable water with 4 ppm hydrogen peroxide, had suffered coating failure and internal corrosion. With the system needing to be operational within two weeks, the municipality sought a repair method that would minimize downtime and avoid hot work, while being suitable for continuous immersion in drinking water.
Water tank was experiencing corrosion issues from many years of use.
Process water lining was experiencing corrosion due to erosion.
Tank which contains activated carbon was wearing off the tank and caused a hole which requires repair.
Two air handling units were heavily corroded and leaking in several areas. The whole basin needed to be coated and properly sealed.
Customer had a tank and wanted to protect with a lining that would resist chemical attack, thereby extending its service life.
The gray and black tanks inside the marine vessel were suffering from coating failure and corrosion issues. The main flange also required repair from wear.
Customer wanted to protects a newbuilt lift station tank in a marine vessel to increase longevity.
Tank was very badly corroded and required refurbishment and protection.