With a wide range of case studies featuring different industries, equipment, products and more with hands on solutions provided.
During the refurbishment of an old piping system within a commercial building, the customer discovered an active leak at a lead and oakum joint. These joints, common in older plumbing systems, had degraded over time, compromising the seal and allowing water to escape.
Raised flange face was showing signs of corrosion and was leaking past the gasket.
A pipe transporting over 2000 Psi of process water had a leak and a metal plate was welded. However, the pressure of the water would always find a way through the weld seams. Belzona was contacted based on previous successful applications we have been able to achieve on leaking pipes in recent times.
1 inch steel pipe had corrosion and was leaking at the pipe seam and socket weld joint.
The customer made the purchase of the stainless steel pots and the seal around the fittings started to leak due to the solvents used and was in need of a product that was compatible to be used with hexane, methanol and acetone. each of these solvents are used at different time during the process.
Pipe elbows had a concrete liner which was very deteriorated and at times concrete chunks became loose in the system which was unacceptable.
The pipe section was suffering from general external corrosion. The pipe had become weakened from severe metal loss. This pipe section never got flooded nor exposed to immersion conditions. Yet, there was a lot of moisture in the environment.
Weld Joint on stainless steel pipe was leaking due to a porosity and slag inclusion.
The existing pipe had become severely weakened over time and they needed to reinforce it to prevent future problems.