Torn Conveyor Belt Repaired with Belzona Elastomers
Conveyor belt was ripped and needed repair before being put back in service.
CASE
Protection of Wastewater Centrifuge
Problem
The centrifuge was suffering from erosion-corrosion and scale buildup. They needed a product that would protect the equipment but also help reduce the buildup and improve the efficiency of the equipment
Industry
Water & Wastewater Management
Application Date
2020
Location
Pickering / Ontario / Canada
Equipment Application
CEP-Centrifugal Pumps
Subtrate
Carbon Steel
Product
Belzona 1111 (Super Metal)
Belzona 1341 (Supermetalglide)
Repair Stages
Application Situation
This is a large wastewater plant that processes approximately 80% of the waste generated by two populated municipalities in the GTA. They had several of these dewatering centrifuges and over the years they had been successfully coating them with Belzona.
Application Method
The steel substrate was prepared to and in accordance with SSPC-SP 11, Bare Metal Power Tool Cleaning. This method of surface preparation was chosen as the plant was in operation and abrasive blasting was not an option. Once the substrate was prepared, Be
Belzona Facts
Belzona 1341 has proven successful in protecting the equipment from erosion-corrosion but also in reducing the scaling and improving the efficiency of the equipment.
Contact your nearest Belzona Consultant and schedule a free evaluation!
Other Cases
Repair And Coating for a Boiler Feed Pump
After 3 to 4 months in use the boiler feed pump was suffering from general corrosion/erosion and the metal shavings in the feed eventually would lead to a through hole in the casing.
Petrochemical Flange Encapsulation
Customer based in Sarnia, Ontario was having corrosion problems in several flanges of his plant. The protective paint that was used in the past would peel off, exposing the substrate, which lead to corrosion around the flange, studs and nuts.