With a wide range of case studies featuring different industries, equipment, products and more with hands on solutions provided.
Customer had a new tank and wanted to protect the inside with a lining that would protect it from 75% Phosphoric acid thereby extending its service life.
The roof and flashing on this customers sunroom was allowing water to enter and damage walls and belongings.
Raised flange face was showing signs of corrosion and was leaking past the gasket.
After many years of pumping river water the pump bowls had severe corrosion issues and required rebuilding.
Tank which contains activated carbon was wearing off the tank and caused a hole which requires repair.
The customer made the purchase of the stainless steel pots and the seal around the fittings started to leak due to the solvents used and was in need of a product that was compatible to be used with hexane, methanol and acetone. each of these solvents are used at different time during the process.
Manufacturing plant that processes Bio-based succinic acid was having issues with their floors. Dry process material of Bio-based succinic acid was being spill onto the concrete floor and during floor washing operations, water activated the acid and this one started to attack the concrete.
Three 96″ dia. x 20′ long bulk sulfuric acid and caustic storage tanks located in the water treatment plant. The 1.5″ – 2″ thick existing grouting system between the steel supports and the concrete base has become broken and dis-bonded. This has exposed the wooden leveling shims. The wooden shims have become rotten over time and require removal and replacement.
Customer based in Sarnia, Ontario was having corrosion problems in several flanges of his plant. The protective paint that was used in the past would peel off, exposing the substrate, which lead to corrosion around the flange, studs and nuts.
Customer had a new tank and wanted to protect the inside with a lining that would protect it from 75% Phosphoric acid thereby extending its service life.