With a wide range of case studies featuring different industries, equipment, products and more with hands on solutions provided.
The new water treatment facility had four rooms with secondary containment areas for storing chemicals that was required to have protecting coating to prevent the area against corrosion.
The centrifuge was suffering from erosion-corrosion and scale buildup. They needed a product that would protect the equipment but also help reduce the buildup and improve the efficiency of the equipment.
Severe pitting, corrosion appeared on the covers after years of operation. The worst of the pitting was about 8mm deep.
Severe pitting, corrosion appeared on the covers after years of operation. The worst of the pitting was about 8mm deep.
Previous supplied pumps had not met the customers expectations of longevity due to the impeller and volute being worn away by the erosion caused by waste water.
Existing joint material had become defective allowing leaking of fluid.
The Dewatering Centrifuges were suffering from struvite and required regular cleaning and maintenance to keep them in operational condition.
High levels of erosion-corrosion caused by entrained solids in wastewater media being pumped for processing
A customer wanted to protect and expand the life of a new pump due to installed at the plant to replace the existing pump which was suffering from corrosion/erosion due to sewage waste.
