With a wide range of case studies featuring different industries, equipment, products and more with hands on solutions provided.
Cavitation had caused erosion of the parent metal and loss of performance of the turbine. Belzona 1341 and Belzona 1421 had been applied in 1998 but had suffered erosion in this aggressive environment.
The centrifuge was suffering from erosion-corrosion and scale buildup. They needed a product that would protect the equipment but also help reduce the buildup and improve the efficiency of the equipment
After many years of pumping river water the pump bowls had severe corrosion issues and required rebuilding.
The customer had three submersible multi stage pumps that required rebuilding and recoating to both the inside and outside of the equipment.
Through wall defect and wear in pump caused by sewage and particles in wastewater was to be repaired and lined with intention of getting more lives out of the pumps.
Diffuser ring was corroded and certain areas were worn out and needed to be resurfaced.
The centrifuge was suffering from erosion-corrosion and scale buildup. They needed a product that would protect the equipment but also help reduce the buildup and improve the efficiency of the equipment.
Severe pitting, corrosion appeared on the covers after years of operation. The worst of the pitting was about 8mm deep.
Severe pitting, corrosion appeared on the covers after years of operation. The worst of the pitting was about 8mm deep.
Upon removal of the top casing, the pump was inspected. It was determined that the bush seating was suffering from corrosion and wear and needed to be rebuilt.